Fabricated Product Details

Bullnoses

BTS Fabrications Bullnose flashings are made with pin-point accuracy using purpose designed manufacturing equipment. Our metal-forming craftsmen have decades of expertise on which to draw to make sure that your building benefits from the perfect finishing touch.

Whether your design calls for a single radius, or multiple radii across a single profile, or even elliptical shapes, the BTS team will rise to the challenge.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.






Back to Products  Top of page


Back to Products  Top of page

Gutter Systems

With particular expertise in rainwater management systems and calculations, BTS Fabrications can offer authoritative advice on this vitally important construction consideration.

The BTS Gutter range includes:

  • Insulated membrane-lined composite gutters
  • Membrane-lined single skin gutters
  • Pre-coated and Powder coated Trimline (eaves) gutters

In addition, BTS can supply every component needed to manage the rainwater from roofline to ground such as sumps, outlets, overflows – even leaf guards. Call the BTS team to discuss your rainwater management requirements. We’ll be happy to help.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.


Back to Products  Top of page
Louvres

Back to Products  Top of page

Architectural Curved Powder Coated Aluminium Fascia

How many times have you seen the sweeping lines of a curved building ruined by the use of faceted flashings?

At BTS Fabrications, we can manufacture smooth curved flashings in a range of radii, limited only by the material type and flashing profile. The BTS design and production teams relish the opportunity to test their expertise on complex, demanding detailing. And if your concept can’t be realised precisely as visualised, we can offer suggestions to help you get the best available alternative without compromising project quality.

Curved flashings are available with pre-bonded butt straps or a secret-fix joint detail with zero visible fixing points.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.



Back to Products  Top of page
soakers

Back to Products  Top of page

Soffit Systems

Soffits are often very much an afterthought in the design process, yet they can be one of the most highly visible and defining elements of the building envelope.
BTS Fabrications produce a range of soffit systems to provide the perfect match or add a striking contrast to the building façade.

Manufactured in a wide variety of materials, BTS Fabrications Soffit systems can be tapered to accommodate curved detailing.

Soffits are available in secret fix, discreet fix or interlocking plank format, each delivering a unique design statement – and each bringing BTS quality to your concept.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.



Back to Products  Top of page
Rainwater Pipes

Back to Products  Top of page

Perforated Fabrications

Produced with precision on a computer controlled purpose-designed turret punch machine, perforated products can have a huge variety of applications, from the purely practical, to the downright beautiful.

We’ve made green roof gravel guards which act as a perimeter flashing, keeping the sedum material in place while allowing controlled drainage for the installation.

We’ve made perforated flashings, louvres and even perforated fin details to enhance the Architects clever use of integrated lighting in the building façade, adding a unique finish and giving the building an added dimension after nightfall.

There are thousands of great design ideas that can be made even better by using this striking material finish. Why not call the BTS Design Team to discuss yours?

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.


Back to Products  Top of page
Flashings

Back to Products  Top of page
Bullnoses

Vantage® CS Coping System

Decorative, structurally strong and, most importantly watertight, This Vantage-Clip-On Coping system is available in a comprehensive range of materials and finishes to compliment or contrast with the overall building aesthetics.

No fixings pierce the capping top which removes the risk of leakage from defected installed screws; specially designed grooves on the clip secures the rubber gasket that ensures a snug watertight antidrum fit.

This system is quick and easy to install with the advantage of being able to fit from the roof, reducing access costs. A suite of ancillary items, including stop ends, corner pieces, T-sections, weatherproofed support brackets, junctions and up stands complete the system. The design team can also work with you to produce bespoke feature components to bring real individuality to your project.

For copings up to 600mm wide brackets should be fixed at a maximum of 1500mm centres. For copings above 600mm in width, brackets should be fixed at a maximum of 1000mm centres. Above widths of 1000mm brackets should be fixed at 750mm centres.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.

Gutter systems

Louvres

We’ve manufactured louvres to suit a vast array of aperture shapes from square to triangle to circle. Each individual blade is painstakingly reproduced using 3d design software to ensure a precision fit and a perfect finish.

We can also supply louvred doors, which arrive on site as a complete package, complete with a full set of door hardware. We’ll even make sure you have a spare key!

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.

arch curved

Soakers

A roofscape without penetrations of some kind is something of a rarity nowadays. Every building envelope has to cater for smoke vents, pipe penetrations, access hatches - a whole range of potential breaches to the overall waterproofing performance of the finished roof.

Available in a wide range of materials and finishes, BTS offers a range of standard and bespoke roof soakers to deliver a fully watertight detail every time.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.

Soffits

Rainwater Pipes and Hoppers

Hoppers and Rainwater Pipes are an integral and critical part of the “rainwater highway” from roofline to ground level. They have to be properly designed to cope with the calculated water volumes. They have to be made from the right materials to endure a highly aggressive operating environment throughout the service life of the building. They have to be properly finished to maintain their looks. And they have to play their part in conveying the designer’s vision for the building envelope.

BTS Fabrications offer rainwater calculations to BS EN 12056:3. They make sure that the right material is used for the application. They insist on the best quality finish to suit the budget.

They do it right – because it has to be right.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.

Perforated Fabrications

Flashings

Flashings serve a multitude of purposes in the building envelope; they can be about weathertightness, airtightness, robust detailing, decoration, structural integrity. They can be simple, or they can be weird and wonderful. But whatever they are, BTS Fabrications are acutely aware that they are a vital finishing touch to the building.

We’ve invested heavily in a pallet racking system to ensure the ready availability of a multitude of materials and finishes, from Tata Plastisol Leathergrain, Lining enamel, Colorcoat HPS200 Ultra®, and Colorcoat Prisma, to Arcelor Plastisols, Polyesters and Spectrum Granite. We can supply aluminium in mill finish, stucco embossed or pre-coated and J57S for anodising.

The list goes on; stainless steel, mesh, tread plate, 3 colours of Alkor Renolit PVC coated metal, plain galvanised steel. We can powder-coat flashings with the complete palette of standard and non-standard RAL/BS and Syntha-Pulvin finishes. And where powder coating isn’t a viable option, we offer a 3-coat wet-spray finishing system.

The BTS team has designed our own production management and materials movement control system, meaning that we can track each order from stock picking to delivery – usually in 1 or two working days – but if you’re under pressure, we also have a ‘next day delivery’ service.

If you are interested in any of our products or have a project you would like to discuss, pleaseclick here to contact us.